Author Archives: Russ

Talamonti Golf Shafts Review

Leave a reply

Talamonti Driver Shafts

By Russ Ryden, A Golf Digest America’s 100 Best Clubfitter
Fit2Score, Dallas Fort Worth, Texas

Phil Talamonti has had a long history in the golf business; President of Wood Brothers, Executive VP of Softspikes, President of SST Puring, and Founder of Advanced Shaft Dynamics. Advanced Shaft Dynamics was Phil’s entry into the shaft alignment business. Several years ago he decided to launch his own shaft company. Early in that process he acquired one of my EI instruments. He used it to validate his designs and check the quality of the shafts he receives from his Chinese foundry. If you have looked around this site, you will see very familiar looking EI charts on the Talamonti Shafts Technology webpage.

I have not tested these shafts, my comments are based on comparing profiles to shafts I know. With this review I created a new category, Boutique Brands. These are smaller companies, with limited product lines, often created by someone with a lot of experience in the golf business.

Talamonti Lite-55

TalamontiLS55Image
TalamontiLS55EiGjTbTrue to the description on the Talamonti website, this is a low spin, or perhaps better stated, low launch light weight design. I know this profile and have fit with it in another brand. its a classic low launch design. When I combine a low launch light weight design like this with a normal head weight I find the result is adequate launch with a piercing ball flight. I have had a great number of ‘surprise’ successes with this design when I am fitting someone with overactive hands. I have fit a number of strong players into light weight designs like this and created the perfect driver for them.

 

Talamonti HL-70

TalamontiHL70Image

 

TalamontHL70EiGjTbLike all the Talamonti shafts, the radial consistency of the Talamoni HL-70 is excellent. Every shaft has a subtle dot on the label indicating the ‘ideal’ alignment plane of the shaft. I found all the ‘dots’ to be on the soft plane. Aligning the ‘dot’ up or down will put the hard plane to the club head face. The marks were dead on, which I must credit to Phil’s past experience with SST and Advanced Shaft Dynamics. The dot is subtle, and with the current generation of rotating head driver hosels, not something one needs to pay much attention to. The radial consistency of these shafts makes them suitable for use in any orientation.

The HL-70 design is not a stranger to me or to most golfers. This is the classic Blue Board design. Almost every manufacturer I know offers this design in some form or another. The mid region is soft in comparison to the butt and tip. If you transition aggressively from backswing to downswing you should try this design. it is the biggest seller in the golf business. If you are looking for a mid launch fairway, this is it. The Talamonti HL-70 has the kind of torque numbers you want in a fairway shaft. If you have dispersion problems with your stock fairway shaft, replace it with this shaft.

 

Talamonti LS-70

TalamontiLS70Image

TalamontLS70EiGjTbThe HL-70 design is not a stranger to me. It has a mid range loss of stiffness butt to tip, a mid shaft stiffness hump, followed with a rapid loss of stiffness to high tip, where it turns up again to a stiff stable tip. Translation, this is a mid launch, mid spin design, with a solid tip. With this kind of radial consistency, this is a bargain at $225 uninstalled.

 

 

Diamana Series W Golf Shaft Review

3 Replies

 Mitsubishi Diamana W-Series Third Generation White Board

By Russ Ryden, A Golf Digest America’s 100 Best Clubfitter
Fit2Score, Dallas Fort Worth, Texas

MRC DiamanaW ImageThe third generation Diamana White Board is a departure from previous designs. Like many shafts in the 2013-2014 season of super low launch head designs, it creates a higher launch tendency presentation of the head to the ball.

Three Generations of Diamana White Designs Compared

MRC Diamana 3Gens
There was little change between the first generation Diamana White Board and the second generation ‘ahina. Torque was unchanged, weight went down slightly as the era of higher density materials began. A stiffer tip area required an adjustment to the mid section of the shaft and a quicker loss of stiffness in the mid-tip transition zone.

In the third generation Mitsubishi Diamana W Series we see a huge change in the EI profile of the shaft. The Tip to Butt ratio, a simple indicator of launch tendency is unchanged, but the path there is quite different. The signature profile of the White Board, and its cousin, the Mitsubishi Fubuki Alpha, a mid shaft bump in stiffness is gone. What we see now is a profile that is similar to many shafts, a consistent loss of stiffness from butt to tip. The signature mid shaft bump is still there, albeit lower and softer. And, unlike previous generations, there is a slight but significant change in profile as the Diamana W series gets heavier.

UltraLight vs 50 gram models

A 50 gram version has been added to the line.  The Diamana W series 50 gram model have higher torque, consistent with creating feel in a light weight shaft. The tips are softer, and in looks much like a stouter version of the ultralight Bassara W series. The line between ultra light shafts and light weight versions of standard Mitsubishi models is blurred with the introduction of 50 gram shafts in both the Diamana W and Diamana B shafts. The Bassara models extend down to 40 gram models, but the 50 gram Diamana’s bridge the gap between the 50 gram Bassara’s and the 60 gram Diamana’s.

MRC Diamana W EiGjTb

Radial quality of all the review samples was excellent. The Diamana W series is suitable for rotating hosels without any regard for alignment. As you can see from the chart above, it does not get any better than this.