Matrix Driver Shaft Review – REIGH & TIE Fitting System

Matrix REIGH Driver Shaft &
Matrix White Tie, Red Tie, Black Tie Driver Fitting System

By Russ Ryden, A Golf Digest America’s 100 Best Clubfitter
Fit2Score, Dallas Fort Worth, Texas


The Matrix REIGN shaft is distributed exclusively through Matrix authorized club fitters. It is an elegant looking shaft with a laser etched logo and serial number. It comes in four structures, MCG, MTX1, MTX2 and HDZ. The MGC is the light weight game improvement design, mid to high ball flight and spin for lower swing speeds. MTX1 is slightly counter weighted for heavier heads or longer builds, the flighting and spin are mid range. The MTX2 series is traditionally weighted, and has a stiffer mid and tip section. The HDZ is premium Matrix, employing Boron and Zylon materials for feel and launch control. It is a unique profile emerging in a number of brands. A rapid loss of stiffness high in the shaft with a long stiff tip.

The technical discussion, measurements and testing results are available only to registered readers

The review samples are a subset of the REIGN line. But they are part of a new approach to golf club shaft fitting. Matrix created a 38 shaft system for Matrix Shaft fitters. They provide the fitting shafts and a software package to guide the fitter through the process of using their products of optimize launch and spin. I discussed this system with Tom DeShill, Director of R&D at Matrix Shafts during the 2015 PGA Merchandise show.

MatrixFittingGridThis fitting system also uses the Matrix Black, Red and White Tie shafts review earlier. The fitter finds the best fit in the Matrix Ozik Red Tie, then based on the optimizations target, continues testing with the proper weight and flex selected from the different design profiles to move the launch and spin toward the target.

My kit arrived and is being fitted with Club Conex UniFit tips. It will head to the range for fitting and testing, stay tuned.